Dealing with a leaking roof can be frustrating, and while small punctures in shingles can sometimes be the cause, the most common culprit is often damaged or improperly installed flashing. If you’ve noticed water stains near your chimney, skylights, or other roof fixtures, your flashing may be failing. Flashing is a thin metal barrier placed around roof edges, vents, chimneys, and other transition points to prevent water from seeping under shingles and causing interior damage. However, over time, flashing can loosen, bend, or corrode, creating vulnerable spots where moisture can sneak in. Here’s what can cause flashing failure:

• Loose Flashing: Strong winds or screws pulling away from the framing can create gaps between the flashing and shingles, making it easier for water to infiltrate.

• Corrosion: Metal flashing is susceptible to rust and tiny holes over time, which can allow water to seep through.

At Safeguard Roofing, our expert team can secure loose flashing by reinforcing it with new fasteners and sealing screw heads with rubber cement to ensure a watertight bond. We also repair minor holes and rust spots using roofing cement or silicone sealant. However, if the flashing is significantly corroded, replacement is the best solution. To prevent costly water damage, we recommend scheduling routine roof inspections—especially after severe storms. Catching minor issues early can save you from expensive repairs down the line. Don’t wait for a small leak to turn into a major problem—contact Safeguard Roofing today to keep your roof in top shape!

Are Your Roof Shingles Starting to Curl? Here’s What You Need to Know

Have you noticed the edges of your roof shingles beginning to lift and curl upward? This phenomenon, known as curling, is often caused by strong winds and can leave your roof looking uneven and worn. If left unaddressed, curling shingles can lead to leaks and extensive roof damage.

Several factors can contribute to shingle curling, including:

• Aging Shingles: Over time, shingles naturally degrade. Standard asphalt shingles typically last up to 30 years, while Class 4 impact-resistant shingles can have warranties of up to 50 years. As they age, shingles may shrink and curl, signaling the need for a roof replacement.

• Poor Installation: If shingles aren’t properly installed, they may not lay flat, making them more vulnerable to strong winds—especially in Nebraska’s unpredictable weather. Additionally, installing new shingles over an existing roof without removing the old layer increases the risk of curling.

• Inadequate Ventilation: A poorly ventilated roof can trap moisture, which weakens the shingles and causes their edges to curl over time.

• Thermal Shock: Rapid temperature fluctuations can also contribute to curling. When a roof is exposed to intense heat during the day and then cools quickly at night, the repeated expansion and contraction can warp the shingles. Nebraska’s drastic temperature drops make roofs particularly susceptible to this issue.

If you’ve spotted curling shingles on your roof, don’t wait until the damage worsens. Our experienced team can provide a comprehensive roof inspection and recommend the best course of action, whether that’s repairs or a full replacement.

The top layer of asphalt shingles is coated with granules—small, crushed stone or ceramic particles infused with pigment for color. These granules are embedded in a fiberglass mat and serve as the first line of defense against harsh weather.

In Nebraska, severe weather conditions like hail and strong winds can cause granules to loosen and wash away. You might notice this by spotting granules in your gutters or around your home’s downspouts. Another common cause of granule loss is roof blistering, which often results from poor ventilation.

Frequent or excessive granule loss can be a warning sign that your roof is nearing the end of its lifespan. However, other factors—such as manufacturing defects, prolonged exposure to extreme heat, or inadequate ventilation—can also contribute to premature granule wear.

Ignoring this issue can lead to clogged gutters, drainage problems, and even roof leaks. If you’re seeing significant granule loss, don’t wait—contact Safeguard Roofing for a professional assessment. Our experienced team will inspect your roof, determine the cause, and provide expert solutions to keep your home protected from Nebraska’s unpredictable weather.

While mold, mildew, and algae thrive in humid environments, they can still develop on Nebraska roofs—especially in shaded areas with dense tree cover that limit sunlight and airflow. The most common offender is Gloeocapsa magma, a blue-green alga that doesn’t damage shingles but can create unsightly dark streaks, particularly on light-colored asphalt roofs. If you spot algae, mildew, or mold on your roof, manufacturer-approved cleaning solutions can help restore its appearance. For long-term protection, consider installing algae-resistant shingles like GAF StainGuard Plus™, which contain copper and zinc ions to inhibit growth. Ignoring these issues can lead to moisture retention, which may deteriorate the roof underlayment and contribute to deck rot. Additionally, visible mold or mildew can reduce your home's curb appeal and resale value, often flagged as a concern during inspections. If you’ve noticed any fungal growth on your roof, contact Safeguard Roofing. Our experienced team can assess the situation and recommend the best solution to keep your roof in top shape.

As asphalt shingles age, they can start to crack—especially in Nebraska's dry climate, where intense sun exposure, temperature swings, and harsh weather conditions accelerate wear and tear. While many shingles are designed to last 25, 30, or even 50 years, extreme weather can shorten their lifespan. Additionally, thermal expansion and movement of the roof deck can contribute to cracking.

Not all cracks are cause for immediate concern. Minor surface cracks on an older roof may not pose a serious threat unless they extend completely through the shingle. However, if cracking appears on a relatively new roof, it could be a sign of a manufacturing defect, improper installation, or poor attic ventilation.

Neglecting cracked shingles can weaken their ability to seal properly, increasing the risk of leaks and interior water damage.

At Safeguard Roofing, our certified professionals provide thorough inspections to assess the extent of damage and determine whether repairs or replacements are necessary. If addressed early, minor cracks can often be repaired, helping you avoid a costly roof replacement. Let our expert team keep your roof strong and your property protected—contact us today for an inspection!

Blistering is a frequent issue that can impact asphalt shingle roofs, especially during hot summer months. These small, bubble-like formations occur when trapped moisture within the shingles heats up and expands, eventually breaking through the surface.

Several factors can contribute to blistering, including:

• Manufacturing Defects: Some shingles develop blisters due to flaws in the production process.

• Poor Roof Ventilation: Without proper airflow, heat and moisture can build up in the attic, increasing the likelihood of shingle blistering. Ensuring your roof has adequate ventilation is crucial when installing new shingles.

One challenge with blistering is that it can sometimes be mistaken for hail damage by insurance adjusters, as both conditions leave similar markings. However, addressing blistering early is essential to prevent leaks and extend the lifespan of your roof.

If you’ve noticed blistering on your shingles, our expert team can assess the damage and provide the best solution to protect your home. Contact us today to schedule a roof inspection and keep your roof in peak condition!

During a new roof installation or replacement, asphalt shingles are individually nailed to the roof deck in an overlapping pattern. While manufacturers specify the number of nails per shingle, homes in high-wind areas may require additional fastening for extra security.

Even with proper installation, shingles can still come loose and blow off due to several factors:

• Strong Winds: If a shingle's edge lifts due to wind pressure and the adhesive seal has weakened over time, the shingle may detach entirely.

• Physical Impact: Roof work from other tradespeople or past repairs can sometimes disrupt shingles, making them more susceptible to coming loose.

• Installation Issues: If the seal between shingles was never properly activated—whether due to improper nail placement or installation in cold temperatures—it can compromise their ability to stay in place.

Loose shingles aren’t always easy to spot, but missing shingles are often noticeable in your yard or surrounding areas. Even losing just one exposes your roof to the elements, increasing the risk of leaks and interior water damage.

If you notice missing shingles, don’t wait—contact us for fast, professional repairs to protect your home from further damage!